DFT Tech

Key featuresTest the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes. Stay on line—identify ground loop resistance without the need to disconnect then reconnect the earth electrode from the system.The Fluke 1630-2 FC Stakeless Earth Ground Clamp is the kind of high-quality, rugged tool you expect from Fluke. Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
Stakeless measurementThe 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.
Fluke Connect® Wireless SystemThe 1630-2 FC supports the Fluke Connect Wireless System (may not be available in all regions). Fluke Connect wirelessly connects the clamp with an app on your smartphone or tablet. The app shows the ground resistance measurements on your smartphone or tablet display. You can save these measurements, GPS location from your phone and images to Fluke Connect Cloud storage and share with your team.
Product overview: Fluke 1630-2 FC Earth Ground ClampEarth ground ac leakage current measurement
Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.Rugged
Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.Logging measurements
The earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to 32,760 measurements in memory at the set logging interval. Saves time by recording and storing measured values.Alarm threshold
User-defined high/low alarm limits, for rapid measurement evaluation.Band-pass filter
Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.

Key featuresWireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracyThe removable magnetic display can be conveniently mounted where it is easily seeniFlex® Flexible Current Probe expands the measurement range to 2500 A ACCAT IV 600 V, CAT III 1000 VIntegrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readingsProprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees itErgonomic design fits in your hand and can be used while wearing protective equipmentRadio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurementThree-year warrantySoft carrying case
Safety Conformance:IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV
Product overview: Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlexWhat Once Took Two People, Now Takes One
Now one technician can do jobs that would otherwise require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings.
The iFlex Flexible Current Probe (included) expands the measurement range to 2500 A AC while providing increased display flexibility. With a cord that runs 6 feet, you can finally measure those tight spaces, awkward sized conductors and disorganized wires.

Fluke 325 True RMS Clamp Meter
Key features:Rugged, reliable True-RMS clamp meter with dc current and frequency measurementsMeasures AC and DC current to 400 AMeasures AC voltage and DC voltage to 600 VProvides True RMS AC voltage and current for accurate measurements on non-linear signalsMeasures resistance to 40 k with continuity detectionMeasures frequency to 500 Hz
Product overview: Fluke 325 True RMS Clamp MeterFluke 325 True RMS Clamp Meter offers big AC/DC features in a small form factor
The Fluke 325 Clamp Meter is the top of the 320 Series Clamp Meters. Designed to perform in the toughest environments and provide noise-free, reliable results, you can trust the 325 to help you confidently diagnose all kinds of electrical problems. It features True RMS measurements, optimized ergonomics, a large backlight display, and a rugged compact design to measure current up to 400 A in tight cable compartments. You can also use it to measure temperature, capacitance, AC/DC current and frequency. Commercial and residential electricians use the 325 to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Frequency measurements allow checking of portable generators; dc current testing battery backups and solar storage equipment.
The Fluke 325 comes with a two-year warranty and a soft carrying case.
Other useful features:Provides Min/Max functionalityMeasures temperature from -10.0°C to 400.0°C (14.0°F to 752.0°F)Presents measurements on a large, easy-to-read backlight displayMeasures capacitance to 1000 UFHold function captures a reading on the displayFeatures a CAT III 600 V, CAT IV 300 V safety rating

Key featuresA full-featured, precision multimeter for troubleshooting electrical and electronic systemsDelivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurementsIncreases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recordingIncludes a built-in thermometer to measure temperature without having to carry a separate instrument
Product overview: Fluke 179 True-RMS Digital MultimeterThe Fluke 179 True-RMS DMM is the industry-standard troubleshooting tool for electrical and electronic systems.
With its precision, reliability, and ease of use, the Fluke 179 is the preferred solution for professional technicians around the world. It includes the features you need to troubleshoot and repair electrical and electronic systems, plus a backlit digital display, analog bar graph, and built-in temperature measurements.Works When You Need It, Where You Need ItYou can trust the rugged reliable Fluke 179 to get the job done in all of the messy, loud, high energy, and high altitude places you work. Whether you need a multimeter for industrial troubleshooting or electrical and electronic system installation or maintenance, the Fluke 179 with its true-RMS capabilities can do the job. It is independently tested for safe use in CAT III 1000 V, CAT IV 600 V environments and backed by a lifetime warrantyJust One of Fluke's Trusted ToolsFluke builds the most trusted tools in the world, which means more than just the Fluke 179. If you work with HVAC equipment, work in the electrical installer's and repairman's world or need a small meter for small spaces, check out the full family of Fluke digital multimeters.Other useful features:* Safety rated CAT III 1000 V, CAT IV 600 V* Comes with a lifetime warranty* Allows closed-case calibration through front panel* Includes ergonomic case with integrated protective holsterEnvironmental Specifications:Operating temperature = -10°C to +50°CStorage temperature = -30°C to +60°CHumidity (without condensation) = 0% – 90% (0°C – 35°C) / 0% – 70% (35°C – 50°C)Mechanical and General SpecificationsSize = 43 x 90 x 185 mmWeight = 420 gWarranty = LifetimeBattery life = Alkaline ~200 hours typical, without backlight

Fluke MDA-510 and MDA-550 Motor Drive Analyzers
Key featuresGuided testing with graphical step-by-step voltage and current connection diagrams makes setup and connection to variable frequency drives easier than everPreset measurement profiles collect data based on the chosen test procedure and reduce the need for complex configurationBuilt-in report writing capabilities make it easy to produce professional as-found and as-left motor-drive troubleshooting reports
roduct overview: Fluke MDA-510 and MDA-550 Motor Drive AnalyzersSimplify complex motor-drive troubleshooting with guided test setups and automated drive measurements that provide reliable, repeatable test results.The Fluke MDA 510 and MDA 550 Motor-Drive Analyzers save time and eliminate the hassle of setting up complex measurements, while simplifying the troubleshooting process for variable frequency drives. Simply select a test and the step-by-step guided measurements show you where to make voltage and current connections, while the preset measurement profiles ensure you will capture all the data you need for each critical motor-drive section—from the input to the output, the DC bus, and the motor itself. From basic to advanced measurements, the MDA-500 Series has you covered, and with a built-in report generator you can quickly and easily generate as-found, and as-left reports with confidence.
The MDA-510 and MDA-550 are the ideal portable motor-drive analysis test tools and can help safely locate and troubleshoot typical problems on inverter type motor-drive systems.
Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics (MDA-550), voltage modulation, and motor shaft voltage discharges (MDA-550).Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system.Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements (MDA-550) with graphical step-by-step voltage and current connection diagrams.Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure.Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others.Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems.The Fluke MDA-510 and MDA-550 Motor Drive Analyzers use guided test measurements to make analysis easier than ever.Drive inputMeasure input voltage and current to quickly see whether values are within acceptable limits by comparing the variable frequency drive’s (VFD), also known as a variable speed drive (VSD) or adjustable speed drive (ASD), nominal rated voltage to the actual supplied voltage. Then, check the input current to determine if the current is within the maximum rating and the conductors are suitably sized. You can also check whether the harmonic distortion is within an acceptable level by visually inspecting the waveform shape or by viewing the harmonics spectrum screen (MDA-550) with total harmonic distortion and individual harmonics.
Voltage and current unbalanceCheck the voltage unbalance at the input terminals of the frequency speed drive so you can ensure the phase unbalance is not too high (> 6-8 %), and that the phase rotation is correct. You can also check the current unbalance, as excessive unbalance may indicate a drive rectifier problem.

Fluke 345 Power Quality Clamp Meter - Electronic Power MeterKey features:* Combines the functions of a power analyzer, power quality logger, scope, data logger, and clamp meter in one handy tool* Measures AC current to 1400 A RMS and DC current to 2000 A without breaking the circuit* Carries the highest safety rating: 600 V CAT IV rated for use at the service entranceProduct overview: Fluke 345 Power Quality Clamp Meter - Electronic Power MeterAC and DC current and voltage measurement – ideal tool for troubleshooting and logging on power electronicsThe Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics.The multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit.Besides effectively performing basic tasks like measuring power and power factor, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.* Setup and troubleshoot variable frequency drives and UPS systems - Verify correct operation by measuring key power quality parameters* Harmonics measurements - Uncover harmonic issues that can damage or disrupt critical equipment* Inrush capture - Check start-up current where spurious resets or nuisance circuit breaker tripping occurs* Load studies - Verify electrical system capacity before adding loadsFor three phase applications the 1735 and 43- Series II products will provide the same type of results.Other useful features:* Delivers accuracy even in noisy environments with distorted waveforms present on electronic loads with low-pass filter* Logs any power quality parameter, including harmonics, for minutes or for over a month to help identify intermittent faults* Verifies batteries with direct measurement of DC ripple (%) for battery and DC systems* Analyzes and logs harmonics digitally or graphically* Captures and analyzes inrush current nuisance tripping due from 3 seconds to 300 seconds* Makes it easy to confirm power meter setup with large backlit color display of waveforms and trends* Downloads logged data via USB with PowerLog application software making it easy to view trends and screenshots, analyze, and create reports* Powers the instrument without using the battery when performing extended logging sessions* Provides built in three-phase power measurement capability for balanced loads* Allows you to view graphs and generate reports with included Power Log software

Fluke CNX 3000 - Wireless Multimeter
Key featuresThe CNX 3000 Wireless Multimeter has all the essentials for convenient test and measurement troubleshooting.
AC and DC voltage measurements to 1000VAC and DC current with 0.01 mA resolutionContinuity, resistance, diode test, capacitance and frequency measurementsMIN/MAX RecordingCAT III 1000 V, Cat IV 600 V; IP54Plus, the CNX wireless enabled modules measure AC voltage, AC current and temperature, which display on the CNX Wireless Multimeter. Choose a standard clamp or flexible clamp to measure AC current. Mix and match modules to suit your unique measurement needs. Read the primary measurement on the main display, and up to three modules at any one time. Modules are available separately or as part of CNX kits.
Product overview: Fluke CNX™ 3000 Wireless MultimeterWork Faster, Safer and Easier with CNX Wireless Test Tools
Fluke's CNX Wireless Test Tools put tools, not your body, near live electrical panels. It's simple. Connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers, and read the results on the CNX 3000 Wireless Multimeter from a safe distance. You can display the meter measurement, plus readings from up to 3 wireless modules.
Don't Get Bogged Down While Isolating Intermittent Electrical Faults
Timing is everything when trying to find an intermittent problem and the hard part is, it doesn't always show up when you have your meter connected. We've solved that problem with CNX – leave your CNX remote modules connected to log measurements and walk away to address other issues. You can then download the data for further analysis.
Work Safely Near Electrical Panels While Wearing Less PPE
Personal protective equipment (PPE) can save your life, but it's bulky, hot and hard to work in. With CNX, there's no need to work in front of live open panels or moving/hazardous machinery.
Picture having the ability to access live readings without being exposed to the live panel. It's easy. Just deenergize the cabinet, open the panel while wearing PPE and connect your CNX modules. Close the cabinet, reenergize and let the CNX multimeter work, reducing the risk of arc flash by separating yourself from hazardous measurement situations.
Testing 3-Phase is Now Faster and Cheaper
When your cabinet is deenergized, attach a CNX current clamp to each phase. Close, reenergize and start taking readings. What used to take hours and use costly equipment can be done in minutes with an affordable CNX wireless system.
Take 3-Phase Measurements in 1/3 the Time. Add your laptop and go from logging to analysis and diagnosis
You can solve problems faster by seeing live measurements from multiple test points on a single screen. With a CNX wireless test tool, you can:
* Take 3-phase measurements in 1/3 the time* Add your laptop and go from logging to analysis and diagnosis* Record over time using the CNX wireless modules and monitor circuit load changes for an hour, a shift or a week* Use the CNX wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data* Perform for analysis with your PC and the CNX wireless test tool software. View data or graphs to see problems easily on the computer display

Fluke CNX™ 3000 Wireless MultimeterKey features

The CNX 3000 Wireless Multimeter has all the essentials for convenient test and measurement troubleshooting.

• AC and DC voltage measurements to 1000V
• AC and DC current with 0.01 mA resolution
• Continuity, resistance, diode test, capacitance and frequency measurements
• MIN/MAX Recording
• CAT III 1000 V, Cat IV 600 V; IP54

Plus, the CNX wireless enabled modules measure AC voltage, AC current and temperature, which display on the CNX Wireless Multimeter. Choose a standard clamp or flexible clamp to measure AC current. Mix and match modules to suit your unique measurement needs. Read the primary measurement on the main display, and up to three modules at any one time. Modules are available separately or as part of CNX kits.

Product overview: Fluke CNX™ 3000 Wireless Multimeter

Work Faster, Safer and Easier with CNX Wireless Test Tools

Fluke's CNX Wireless Test Tools put tools, not your body, near live electrical panels. It's simple. Connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers, and read the results on the CNX 3000 Wireless Multimeter from a safe distance. You can display the meter measurement, plus readings from up to 3 wireless modules.

Don't Get Bogged Down While Isolating Intermittent Electrical Faults

Timing is everything when trying to find an intermittent problem and the hard part is, it doesn't always show up when you have your meter connected. We've solved that problem with CNX – leave your CNX remote modules connected to log measurements and walk away to address other issues. You can then download the data for further analysis.

Work Safely Near Electrical Panels While Wearing Less PPE

Personal protective equipment (PPE) can save your life, but it's bulky, hot and hard to work in. With CNX, there's no need to work in front of live open panels or moving/hazardous machinery.

Picture having the ability to access live readings without being exposed to the live panel. It's easy. Just deenergize the cabinet, open the panel while wearing PPE and connect your CNX modules. Close the cabinet, reenergize and let the CNX multimeter work, reducing the risk of arc flash by separating yourself from hazardous measurement situations.

Testing 3-Phase is Now Faster and Cheaper

When your cabinet is deenergized, attach a CNX current clamp to each phase. Close, reenergize and start taking readings. What used to take hours and use costly equipment can be done in minutes with an affordable CNX wireless system.

Take 3-Phase Measurements in 1/3 the Time. Add your laptop and go from logging to analysis and diagnosis

You can solve problems faster by seeing live measurements from multiple test points on a single screen. With a CNX wireless test tool, you can:

• Take 3-phase measurements in 1/3 the time
• Add your laptop and go from logging to analysis and diagnosis
• Record over time using the CNX wireless modules and monitor circuit load changes for an hour, a shift or a week
• Use the CNX wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data
• Perform for analysis with your PC and the CNX wireless test tool software. View data or graphs to see problems easily on the computer display

Fluke 345 Power Quality Clamp Meter - Electronic Power MeterKey features Combines the functions of a power analyzer, power quality logger, scope, data logger, and clamp meter in one handy toolMeasures AC current to 1400 A RMS and DC current to 2000 A without breaking the circuitCarries the highest safety rating: 600 V CAT IV rated for use at the service entrance Product overview: Fluke 345 Power Quality Clamp Meter - Electronic Power Meter AC and DC current and voltage measurement – ideal tool for troubleshooting and logging on power electronicsThe Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics.The multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effectclamp meter design makes measurement of dc current possible without the need to break the circuit.Besides effectively performing basic tasks like measuring power and power factor, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.Setup and troubleshoot variable frequency drives and UPS systems - Verify correct operation by measuring key power quality parametersHarmonics measurements - Uncover harmonic issues that can damage or disrupt critical equipmentInrush capture - Check start-up current where spurious resets or nuisance circuit breaker tripping occursLoad studies - Verify electrical system capacity before adding loadsFor three phase applications the 1735 and 43- Series II products will provide the same type of results.Other useful features:Delivers accuracy even in noisy environments with distorted waveforms present on electronic loads with low-pass filterLogs any power quality parameter, including harmonics, for minutes or for over a month to help identify intermittent faultsVerifies batteries with direct measurement of DC ripple (%) for battery and DC systemsAnalyzes and logs harmonics digitally or graphicallyCaptures and analyzes inrush current nuisance tripping due from 3 seconds to 300 secondsMakes it easy to confirm power meter setup with large backlit color display of waveforms and trendsDownloads logged data via USB with PowerLog application software making it easy to view trends and screenshots, analyze, and create reportsPowers the instrument without using the battery when performing extended logging sessionsProvides built in three-phase power measurement capability for balanced loadsAllows you to view graphs and generate reports with included Power Log software

30) Fluke ScopeMeter 190-504/S Portable Oscilloscope
Key features* Four electrically isolated inputs* CAT III 1000 V / CAT IV 600 V safety rated* Choose from 60 MHz, 100 MHz, 200 MHz or 500 MHz bandwidth models* Fast sampling rate, up to 5 GS/s with up to 200 ps resolution (Depending on model and channels used)* Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details* Dedicated 999 Count digital multimeter.
Product overview: Fluke ScopeMeter 190-504/S Portable OscilloscopeWhy choose the new 500 MHz four-channel ScopeMeter® test tool?
A faster sample rate and higher bandwidth means greater accuracy and clarity. The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients.See more, fix more with the four-channel CAT IV rated Fluke ScopeMeter 190-504/SThe Fluke ScopeMeter 190 Series II combines the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:
Other useful features:* Four meter measurements via scope BNC inputs in four-channel models* Connect-and-View™ continuous auto-trigger, single shot, pulse width, and video triggering* ScopeRecord roll mode, capture waveform sample data for up to 48 hours* TrendPlot, trend measurement readings for up to 22 days* Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)* IP-51 rated for dust and drip proof to withstand harsh environments* Isolated USB ports for memory devices and PC connectivity* Li-Ion battery for extended operating timespan:190-X04, four-channel models up to 7 hour (BP291 included standard)Charge spare battery using optional external battery charger EBC290* Easy-access battery door to make it easy to swap batteries* A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lockGain four times the diagnostic power plus CAT IV safety rating
TheFluke ScopeMeter 190-504/S portable scopes are double-insulated four-channel floating oscilloscopes, safety rated for measurements in CAT III 1000V/CAT IV 600V environments.
Three-dimensional testing for industrial systems
Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:
* Circuit voltage/current overloading* Signal timing measurements and synchronization issues* Attenuation/input impedance mismatch* Signal fluctuation/driftThree-phase testing for diagnosing VSD, power inverters, and converters:
* Test for harmonics, transients and loads at the three-phase power input* Troubleshoot DC to AC converters for faulty IGBT gates or filter circuits* Test PWM output for reflections and transients or voltage unbalanceSafely measure from mV to kV

Fluke 120B Series Industrial ScopeMeter handheld Oscilloscopes
Key features:Dual-input digital oscilloscope and multimeter in a ScopeMeter® test toolAvailable with a 40 MHz or 20 MHz oscilloscope bandwidthFeatures Connect-and-View™ trigger simplicity for hands-off operationIncludes IntellaSet™ technology to automatically and intelligently adjust numerical readout based on measured signalProvides a dual-input waveform and meter reading recorder for trending data over extended periods
Product overview: Fluke 120B Series Industrial ScopeMeter handheld OscilloscopesSimplified testing, more insight and faster electro-mechanical troubleshooting
The compact ScopeMeter® 120B Series, is the rugged oscilloscope solution for industrial electrical and electro-mechanical equipment troubleshooting and maintenance applications. It's a truly integrated test tool, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter 120B Series also integrates with Fluke Connect® mobile app and FlukeView® for ScopeMeter software to enable further collaboration, data analysis and archiving of critical test information.
*Not all models are available in all countries. Check with your local Fluke representative.
Other useful features:
* Features two 5,000-count True-RMS digital multimeters* Offers recorder Event Detect to capture elusive intermittent signals on repetitive waveforms up to 4 kHz* Comes with shielded test leads for oscilloscope, resistance and continuity measurements* Features resistance, continuity, diode, and capacitance meter measurements* Performs power measurements (W, VA, VAR, PF, DPF, Hz)* Measures voltage, current and power harmonics* Check Industrial networks with BusHealth physical layer tests against defined reference levels (125B only)* Allows you to save and recall data and instrument setups* FlukeView® ScopeMeter® software for Windows®* Features a rugged design to withstand 3g vibration, 30g shock, and rated IP51 according to EN/IEC60529* Runs on a Li-Ion rechargeable battery providing seven-hours operation (with four-hour charge time)* Features highest safety rating in the industry: safety rated for CAT IV 600 V

Fluke FoodPro & FoodPro+ Infrared Food ThermometerKey features

· Highly accurate non-contact infrared thermometer that instantly measures surface temperatures of food products

· Allows taking rapid and frequent non-contact temperature measurements without risk of cross contamination

· Measures temperatures from -35 to 275°C

· Features HACCP check lights for instant recognition of safe/unsafe temperatures

The FoodPro is a great help for:

Receiving: Use the FoodPro thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program

Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures

Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements

Equipment Calibration: Verify the proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs

Provides LED target illumination to highlight the entire measurement spot for accurate targeting

Is hand washable (IP54 sealed)

FoodPro Plus IR Thermometer

Key features

· Two-in-one infrared thermometer for foodservice

· Combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings

· Features an integrated countdown timer with alarm that monitors line checks as well as cooking and cooling intervals

· Provides a built-in fold-out probe for measuring internal food temperatures

The Fluke FoodPro Plus is useful for:

Receiving: Use the FoodPro Plus thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.

Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures

Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements

Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs

Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste

Measures -35 to +275 °C (-31 to 527 °F) with non-contact thermometer and from -40 to 200ºC (-40 °F to +392 °F)with probe

Key featuresBe safer: Measure voltage to 1000 V ac through the open fork, without test leads.Be faster: No need to open covers or remove wire nuts.Be more efficient: Simultaneously measure voltage and current.Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).Go beyond simple detection. Actually measure ac voltage and current values without test leads.
Product overview: Fluke T6-1000 Electrical TesterMeasure voltage … without test leads
We know working in electrical boxes jammed with wires can be challenging when you’re trying to find a safe metallic contact point. Now, with Fluke’s T6-600 or T6-1000 with integrated FieldSense technology, you can quickly and easily take measurements by sliding the open fork over a conductor to see the voltage level without the need for test leads.*

Fluke DS701 Diagnostic ScopeKey features

• High definition probe with dual-view camera
• Processing speeds that render a smooth, clear, consistent image
• 7” LCD screen for easy viewing
• Macro to micro zoom function
• Adjustable lighting to capture the best image
• Up is Up® technology for an appropriate orientation, regardless of the probe location

Product overview: Fluke DS701 Diagnostic Scope

Diagnostic scope with 7” LCD screen for accurate inspections in difficult to reach spaces. Adjustable LED lighting and digital zoom for quality images. Up is Up® technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe. Intuitive user interface with easy to navigate button technology. 

 

Expand the flexibility of your videoscope with optional probes offering cameras that range in diameter from 3.8 MM to 8.5 MM and probes as long as 20 meters.  Equip yourself the right probe for your environment.

Key featuresA unique earth ground tester that performs fast, accurate testing with and without stakesTests 3- and 4-pole fall-of-potential, and 4-pole soil resistivity (with stakes)Performs selective earth ground rod testing (one clamp + stakes)Performs stakeless earth ground rod testing (two clamps)Features IP56 rating for outdoor use
Product overview: Fluke 1623-2 GEO Earth Ground Resistance MeterFluke 1623-2 Earth Ground Tester performs all four ground tests quickly and accurately.
The Fluke 1623-2 earth ground tester measures earth ground loop resistances using only clamps, only stakes, or one clamp and stakes. With the stakeless test method, the Fluke 1623-2 is able to measure earth ground loop resistances for multi-grounded systems using only current clamps. This technique eliminates the dangerous, and time consuming job of disconnecting parallel grounds, and finding suitable locations for auxiliary ground stakes. You can use it to perform earth ground tests in places you’ve not considered before, such as inside buildings, on power pylons, or anywhere you don’t have access to soil.
Keep your options open
Keep in mind, the stakeless test method works only if a bonded earth ground system exists for the building or structure under test. If there is only one path to ground, typical with many residential applications, you will need to use the fall-of-potential test method that requires stakes.
The 1625-2 is also very easy to use. World class accessories speed set up and test time. And the tester tells you which stakes or clamps to connect for each test. The large rotary switch and buttons are easy to operate even with a gloved hand. And you can store up to 1,500 records and access them easily via the USB port.
Need even more accuracy? Check out the 1625-2 that offers:
Automatic Frequency Control that identifies existing interference and chooses a measurement frequency to minimize its effect, thus providing a more accurate earth ground value.R* measurement that calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see.Other useful capabilities:
* Includes USB port for data storage and transfer* Works with world class that speed set up and test time* Comes with a rugged carrying case

Key features:
Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electriciansAutomatically calculates Polarization Index and Dielectric Absorption RatioMakes repetitive tests simple and easy with a Compare (Pass/Fail) function Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
Product overview: Fluke 1507 Insulation Resistance TesterThe Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications.
Take advantage of the 1507 full feature set to easily and quickly perform advanced insulation resistance testing. Its handy size and light weight make it easy to pack and use. Additional features, like the remote probe, save both time and money especially when performing repetitive tests. And its reasonable price and rugged reliability make it an excellent value.
Other useful capabilities:
* Performs insulation tests from 0.01 M to 2.0 G* Includes live circuit detection to prevent insulation test if voltage >30 V is detected* Includes auto-discharge of capacitive voltage for added user protection* Measures AC/DC voltage from 0.1 V to 600 V and resistance from 0.01  to 20.00 k* Provides lo-ohms earth-bond continuity (200 mA)* Simplifies repetitive or hard-to-reach testing with the remote test probe* battery power with auto power off* Presents results on a large, backlit display* Features CAT IV 600 V overvoltage category rating* Comes with remote probe, test leads, test probes, alligator clips and one-year warranty* Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work* Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests

Fluke 1732 and 1734 Three-Phase Electrical Energy LoggersKey features:Key measurements: Automatically capture and log voltage, current, power, power factor, energy and associated valuesFluke Connect® compatible: View data locally on the instrument, via Fluke Connect mobile app and desktop software or through your facilities’ WiFi infrastructureConvenient instrument powering: Power instrument directly from the measured circuitHighest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstreamMeasure all three phases: With included 3 flexible current probesComprehensive logging: More than 20 separate logging sessions can be stored on the instruments. In fact, all measured values are automatically logged so you never loose measurement trends. They can even be reviewed during logging sessions and before downloading for real-time analysisOptimized user interface: Quick, guided, graphical setup ensures you’re capturing the right data every time, and the intelligent verification function indicates correct connections have been made, reducing user uncertaintyBright, color touch screen: Perform convenient in-the-field analysis and data checks with full graphical displayOptimized user interface: Capture the right data every time with quick, guided, graphical setup and reduce uncertainty about your connections with the intelligent verification functionComplete “in-the-field

Seek Scan
Simple Screening for Safer Communities, Helps businesses, institutions, and venues easily screen forskin temperature
Accurate, automated and affordable Specifically designed and calibrated for skin temperature 
measurement Enables social distancingPerfect for lobbies, hallways and other key access pointsSet a customizable alarm temperature and start screening in minutes 

Seek Scan™ is a simple, low-cost, thermal imaging system designed to automate body temperaturescreening using skin temperature as a proxy.
Unlike traditional screening methods, Seek Scan enables social distancing, self-measurement and finds 
the most reliable spot on the face for temperature measurement.
The Seek Scan process provides an additional layer of preventive screening and delivers more peace of 
mind to businesses, institutions and participants. 
Set up Seek Scan in minutes using two tripods and a Windows PC.
Made in USA with global components 
PERFECT FOR
- Small, medium & large businesses- Factories and warehouses- Hotels- Restaurants- Venues, theaters and arenas- Nursing homes- Schools and daycares- Gyms and other sports facilities

ANALYZING SKIN TEMPERATUREBELOW ALARM TEMPERATUREABOVE ALARM TEMPERATURE


Key Features
Designed and calibrated for skin temperature Unlike typical industrial thermal cameras, Seek Scan wasdeveloped for precise skin temperature measurement and also includes a fixed heat source that 
maximizes accuracy.Enables social distancing Non-contact, non-invasive screening eliminates contact between screening personnel and participantsAffordable Priced significantly lower than other thermal screening solutions
Fast, automated screening 
In seconds, the system automatically detects a face, finds the most reliable spot to measure and displays 
a pass/fail alert based on the customizable alarm temperature
Proven technology 
Thermal imaging has been used globally for years as a fast, non-invasive way to measure temperature Easy to install and easy to use 
Start scanning in minutes using two tripods and a Windows PC
Technical Summary 
Thermal Sensor Resolution :  206 (h) x 156 (v)Visible Light Camera Resolution : 640 x 480Horizontal / Vertical Field of View  : 35° (h)   /  26° (v)Lens Focal Length / F-Number : 4.0mm  /   f/1.20Frame Rate : <9HzPower : USB 5V (Plugs into Computer USB-A port)Dimensions (L x W x H) & Weight :  3 x 8 x 9 cm  /  140 gTripod Mount : 1/4"-20 Standard Camera Tripod Mount
Fixed Heat Source Specifications Temperature-Controlled Device : Emits a constant reference temperaturePower : 110V to 220V  50/60Hz (Plugs into Wall Outlet)Dimensions (L x W x H) & Weight : 3 x 9 x 9.5 cm  /  80 gTripod Mount  : 1/4"-20 Standard Camera Tripod Mount
Measurement Specifications
Temperature Accuracy :± 0.3°C (0.5°F) between 36°C to 40°C (96°F to 104°F) @ 1.5 meters (5 feet) 
Verified in a laboratory setting using a fixed heat sourceSensor Sensitivity : 40 mK (typical), <50 mK (max) @ 25°C (Post Signal Processing)
System Specifications
System Requirements Supported Operating Systems: Windows 7 and 10Operating Temperature : Optimal temperature accuracy in conditions below 105°F (40°C) ambientScan Measurement Time : 1 SecondData Capture : Event Trigger with JPEG and Thermal Spot TemperatureData Output Ask your sales representative for options to integrate Seek Scan data with other systems
WHAT’S IN THE BOX - Camera - Camera USB-A Cable - Fixed Heat Source - Fixed Heat Source Power Cable - USB Stick with Seek Scan Software - Quick Start Guide

Key features

• Two-in-one IR and contact thermometer with a 30:1 distance-to-spot ratio
• Measures temperatures from -40°C to 650°C (40°F to 1202°F)
• Makes it easy to access advanced features with the soft-key buttons and graphical display
• Features rugged, ergonomic design that stands up to tough industrial, electrical, and mechanical environments
• Works with most K-type thermocouples

Product overview: 566 Thermal Gun Infrared & Contact Thermometer

The 566 IR and contact thermometer features a simple, three-button, on-screen menu interface (in 6 languages) to make it easier than ever to measure temperature. You can quickly navigate advanced features to adjust emissivity, start data logging, or turn alarms on and off with just a few pushes of a button. And with its rugged, easy-to-use, ergonomic design, the Fluke 566 can stand up to tough industrial, electrical, and mechanical environments. These tools go beyond other IR thermometers (or pyrometers), helping you work more efficiently in more applications.

Other useful features:

• Adjustable emissivity that allows you to confidently measure a wide variety of surfaces
• Up to 20 points of data for downloading and recalling later
• Two levels of backlight on the display
• Included Type-K thermocouple bead probe
• Features audible and visual alarms to instantly alert you to measurements outside of your set limits
• Provides MAX, MIN, DIF and AVG functions to quickly identify problems

Fluke 561 HVAC, 568 Ex, Fluke 51 II, Fluke 64 MAX IR Infrared & Contact Thermometer

561 HVAC Infrared & Contact Thermometer

 

Key features

· Contact and non-contact IR thermometer for measuring up close or at a distance, without a ladder

· Measures temperature from -40°C to 550° C (-40°F to 1022°F)

· Works with all standard mini-connector type K thermocouples

· Provides single-point laser sighting

· Allows easy emissivity adjustment for measuring pipes and other shiny surfaces more accurately

568 Ex Intrinsically Safe Mini Infrared Thermometer

 

Key features

· Intrinsically safe infrared and contact thermometer

· Meets intrinsically safe certifications in Class I Div. 1 and Div. 2 or Zone 1 and 2 hazardous environments

· Measures temperatures from -40°C to 800°C (-40°F to 1472°F)

· Comes with a conductive case to safely carry the IR thermometer into hazardous areas

 

· Offers a distance-to-spot ratio of 50:1

Fluke 51 II Handheld Digital Probe Thermometer

 

Key features

· Single Input digital thermometer for lab, QA, process calibration, food safety and HVAC

· Measures J, K, T, and E-type thermocouples

· Presents results in °C, °F, or Kelvin (K) on a large backlit display

 

· Includes a relative time clock on MIN, MAX, and AVG to provide a time reference for major events

Fluke 64 MAX IR Thermometer

 

Key features

Key features

· Precise laser technology for more accurate and repeatable measurements

o Temperature accuracy of up to ± 1??? or ± 1% of reading whichever is greater with 20:1 distance to spot ratio

· Flashlight and large, easy-to-read backlit LCD display for easy viewing even in dark environment

 

· IP54 rated for extra protection against airborne contaminants

Fluke 714B Thermocouple Calibrator


Key features

Highly accurate, full featured easy-to-use, single-function thermocouple temperature calibratorMeasures and simulates 17 thermocouple types and millivoltsMeasures 4 to 20 mA signals while simultaneously sourcing a temperature signalComes with a magnetic hanging tool designed in for convenient hands-free operationFeatures configurable 0% and 100% source settings for quick 25% linearity checks
Product overview: Fluke 714B Thermocouple CalibratorFluke 714B Thermocouple Calibrator offers high accuracy thermocouple temperature calibration the easy way
Fluke 714B is a handheld, battery-operated instrument that measures and sources a variety of thermocouple types and millivolts. Calibrates a linear thermocouple transmitter with the mV source function and measures mA while sourcing temperature. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings.
Put those capabilities together with its rugged construction and ease of use and you have an ideal test tool for temperature calibration professionals who want a highly accurate, single function thermocouple temperature calibrator
Other useful features:
Calibrates linear TC transmitter with mV source functionProvides linear ramp and 25% step auto ramp based on 0% and 100% settingsDual inputs and backlit display for easy interpretation of measurementsRemembers power down settings to easily restart tests when powered upProvides one-year and two-year specifications and traceable certification of calibration

Fluke 500 Series Battery Analyzer
Key features / Fluke BT510 key features:
Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under testDischarge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the batteryRipple Voltage Test – Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. Allows users to test ac components in dc charging circuits and find one of the root causes of battery deteriorationMeter and Sequence Modes – The Meter mode is used for a quick test or troubleshooting. In this mode you can save and read the readings in a measurement or time sequence. The Sequence mode is for maintenance tasks with multiple power systems and battery strings. Before a task starts, users can configure a profile for the task for data management and report generationThreshold and Warning – Users can configure a maximum of 10 sets of thresholds and receive a Pass/ Warning/ Fail indication after each measurementIntercell Strap Resistance Test and Data Management – Measures the resistance of the intercell connection between batteries in a string. Once the measurements are completed Fluke Battery Management Software version 1.0.69 can now report the strap resistance for a battery string or historical data over time.AutoHold – When AutoHold is turned on, a reading is captured when it remains stable for 1 second. The reading is then released when a new measurement startsAutoSave – When AutoSave is turned on, measured values are saved to internal memory automatically after an AutoHold reading is capturedFluke Battery Management Software – Easily import data from the Product to a PC. The measurement data and battery profile information is stored and archived with the Management Software and can be used for comparison and trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reportsComprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysisOptimized user interface – Quick, guided setup ensures you're capturing the right data every timeBattery life – 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation.USB port – For fast data download to supplied data analysis and report management application software.Highest safety rating in the industry – CAT III 600 V, 1000 V dc max. rated for safe measurements all around the battery power supply equipment.Fluke BT520 Key features: (Designed for measuring batteries in cabinets and hard to reach places)
All of the above plusBTL20 Interactive Test Probe set, with long and short probe extenders and built-in LCD display and speaker for visual and audio feedbackLarge soft carry caseFluke BT521 Key features: (Designed for users who need to incorporate temperature measuring)
All of the above* plusBTL21 Intelligent Test Probes with long and short extenders, built-in LCD display and speaker for visual and audio feedback and integrated infrared temperature sensor for taking temperature measurements on the negative battery post with every testWireless capability works with Fluke Battery Analyze mobile app (Fluke BA Mobile)*View profile and associated test results from the Battery AnalyzerSend out the profile and test results via Email with (.csv) data format* BTL20 not included with the Fluke BT-521* Not currently compatible with Fluke Connect® app

Fluke DS701 Diagnostic Scope
Key featuresHigh definition probe with dual-view cameraProcessing speeds that render a smooth, clear, consistent image7” LCD screen for easy viewingMacro to micro zoom functionAdjustable lighting to capture the best imageUp is Up technology for an appropriate orientation, regardless of the probe location
Product overview: Fluke DS701 Diagnostic ScopeDiagnostic scope with 7” LCD screen for accurate inspections in difficult to reach spaces. Adjustable LED lighting and digital zoom for quality images. Up is Up® technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe. Intuitive user interface with easy to navigate button technology.
Expand the flexibility of your videoscope with optional probes offering cameras that range in diameter from 3.8 MM to 8.5 MM and probes as long as 20 meters. Equip yourself the right probe for your environment.